485848005__X (waveform)

ERBESSD / 485848005 · sensor attached · replace sensor · analysis runs

Priority

high (score 13.00, higher is worse), calculated 2026-09-07 23:43:26+0000 by analysis 8e6f9b7b6962f0095b9d1b2246cfe4da.

LevelScoreCalculatedAnalysis
high 13.00 2026-09-07 23:43:26+0000 8e6f9b7b6962f0095b9d1b2246cfe4da
high 13.00 2026-09-07 23:42:28+0000 afc68c322e87de10b2812b6b81d21dde

Latest KPI values (GET /mpoints-streams/{id}/kpi)

30 measurements; latest 2026-09-04 05:40.

KPILatest valuePoints in trend
rms2.62303950626303130
velocity_rms_10_1000hz134.778135391859530
velocity_rms_2_1000hz134.778135414020630
velocity_rms_2_max134.779152551510230
velocity_rms_10_max134.7791525293493230
peak8.67543817308232530
peak2peak16.6442243834350130
crest_factor3.307398974498090330
kurtosis2.440878288982595730
envelope_rms5.72492511092415730
envelope_peak_score22.74210303146719530

Diagnostic findings (GET /sva/8e6f9b7b6962f0095b9d1b2246cfe4da/symptoms and /changes/active)

SymptomActiveDetectionsPossible faults
symptomAsynchronousEnvelopeHarmonics yes 30 active of 30 bearingFault (60%), processRelatedHarmonics (40%)
symptomDominant1x yes 30 active of 30 unbalance (50%), structuralLooseness (30%), resonance (20%)

Trend scalars at this measuring point (GET /scalars/?sensor_id=…)

Scalars are keyed by sensor, not by stream — the link to this measuring point is derived: this point's streams name their active sources, the sources name their sensors, and the sensors' scalars are what you see here. The scalars page draws the whole chain.

The sensors at this measuring point report no trend scalars.

rpm: outside 600–3600 RPM an rpm scalar is required — without it, bearing analysis silently returns nothing.

Embedded analysis view

This iframe is the one thing the browser loads straight from the deployment. Its URL carries only the stream id — no credential — and this page's own Content-Security-Policy: frame-src header is what allows the frame (the deployment sets no framing restriction of its own).