485848000__Y (waveform)

ERBESSD / 485848000 · sensor attached · replace sensor · analysis runs

Priority

low (score 0.00, higher is worse), calculated 2026-09-07 23:43:20+0000 by analysis be74bdee2624c09b5d38042935ef61fc.

LevelScoreCalculatedAnalysis
low 0.00 2026-09-07 23:43:20+0000 be74bdee2624c09b5d38042935ef61fc
low 0.00 2026-09-07 23:42:24+0000 2c09c08e2f13ff1a2959ed3dac7fc293

Latest KPI values (GET /mpoints-streams/{id}/kpi)

30 measurements; latest 2026-09-04 05:40.

KPILatest valuePoints in trend
rms0.3188285569007116630
velocity_rms_10_1000hz3.93278796429668230
velocity_rms_2_1000hz3.93367428513171630
velocity_rms_2_max3.936323331886314730
velocity_rms_10_max3.935437607657235530
peak2.439763664872162330
peak2peak2.63283996820240930
crest_factor7.65227459104908230
kurtosis29.91535663930636730
envelope_rms0.33850517384999330
envelope_peak_score0.3868964868232933630

Diagnostic findings (GET /sva/be74bdee2624c09b5d38042935ef61fc/symptoms and /changes/active)

SymptomActiveDetectionsPossible faults
symptomDominant1x yes 30 active of 30 unbalance (50%), structuralLooseness (30%), resonance (20%)
symptomImpacting yes 30 active of 30 outerRaceBearingDamage (50%), mechanicalLooseness (30%), processRelatedImpacting (20%)

Trend scalars at this measuring point (GET /scalars/?sensor_id=…)

Scalars are keyed by sensor, not by stream — the link to this measuring point is derived: this point's streams name their active sources, the sources name their sensors, and the sensors' scalars are what you see here. The scalars page draws the whole chain.

The sensors at this measuring point report no trend scalars.

rpm: outside 600–3600 RPM an rpm scalar is required — without it, bearing analysis silently returns nothing.

Embedded analysis view

This iframe is the one thing the browser loads straight from the deployment. Its URL carries only the stream id — no credential — and this page's own Content-Security-Policy: frame-src header is what allows the frame (the deployment sets no framing restriction of its own).